Description
1-Part is a moisture curing, pourable sealant designed for use in pitch pans and warranted ChemCurb/E-Curb penetration seals. 1-Part is suitable for application in damp, dry, or cold climates. 1-Part is solvent free, contains no isocyanates and will not shrink upon curing. 1-Part can not “out-gas” or bubble on damp surfaces as urethane sealants often do. 1-Part has resilient
“elastomeric” properties and excellent adhesion to most construction materials. 1-Part can be used effectively in many difficult construction site conditions and cures in wet or dry climate conditions and at low temperatures (32°F / 0°C). 1-Part’s low durometer accommodates greater movement in penetration seals than typical urethane sealants.
• Solvent free, 100{05aebf0802fbb0d9e8aaecb097d33bcee705e113ada15fb14b9f190f9232e09b} solids will not shrink
• 20 minute skin over
• No outgassing on damp surfaces
• Good UV stability, will not suntan
• Paintable within 24 hours (See limitations)
• Self leveling, no special tools or mixing required
• Application at temperatures as low as 32°F (0°C)
• Extended warranties available
• Made in the USA – ISO 9001:2015 certified
1-Part is a moisture cure sealant. Rate of cure is dependent on atmospheric conditions. Curing proceeds at a rate of 1/4” a week at 70°F (22°C) and 50{05aebf0802fbb0d9e8aaecb097d33bcee705e113ada15fb14b9f190f9232e09b} Relative Humidity. Lower temperature and humidity will inhibit the rate of cure. Higher temperature and humidity will accelerate rate of cure. Depths of more than 2” will cure through in 2 to 3 months. DO NOT install if rain is anticipated within 4 hours.
1/2 Gallon Pouch Gray, White, & Black, 4 pouch/carton, 48 cartons/pallet. Sold per carton.
